ATTO Technology 2390 Setup Guide download pdf (Page 15)

3 Go to the DKU_<version_number>/Utils/BIOS directory on the DVD, where <version_number>

represents the version of the DKU. For example:

cd /mnt/cdrom/DKU_3.5.0/Utils/BIOS

TIP If the DKU has already been installed on the workstation, you can access its contents in the

/usr/discreet/DKU directory, without having to use the application DVD.

Each platform supported by the version of your Visual Effects, Finishing, and Colour Grading application

has its own directory that contains an .iso file.

NOTE For more information about updating the BIOS on your workstation, refer to the README file also

located in the platform's directory.

4 Type:

cd <platform>

5 Burn the .iso file onto a CD and place it in the DVD-ROM drive on the workstation.

6 Reboot the workstation and press F10 to enter the system BIOS.

7 Optional: Press F8 to select a language.

8 Select File | Flash System ROM.

The Select a Drive dialog box appears.

9 Select CD-ROM and press F10 to confirm.

10 Select the .bin file.

The Flash

System ROM confirmation dialog box appears.

11 Press F10 to confirm.

12 Press any key.

A message stating that the system ROM flash was successful appears.

13 Verify system BIOS settings. See Checking Your System BIOS Settings on page 9.

14 Select File | Save Changes and Exit.

Checking Your System BIOS Settings

Before installing your operating system, use the following table to validate your BIOS settings.

WARNING If SATA emulation is not set up correctly, you will need to reinstall Red Hat Linux.

The following table lists the proper Autodesk certified BIOS settings. Items not listed are set to their default

factory settings.

ValueItemBIOS Menu

Separate IDE ControllerStorage Options, SATA EmulationStorage

Integrated SATABoot Order, Hard Drive

Integrated IDE

Optical DriveBoot Order

USB Device

System BIOS | 9

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

No comments

ATTO Technology 2390 Setup Guide Page 15