ATTO Technology 2390 Setup Guide download pdf (Page 38)

4 Connect your audio hardware devices. To avoid system instability, make sure you connect your audio

hardware as illustrated for your configuration. See Audio Wiring on page 32.

5 Configure the Lucid converter for remote or local control. See Configuring the Lucid ADA 88192

Converter on page 33.

6 Set the appropriate keywords in the software initialisation file. See Audio Keywords in the Visual Effects

and Finishing Configuration File on page 36.

Audio Hardware Components

Discreet Native Audio uses the following hardware components, shipped with your system.

Lucid Converter ADA 88192 Converts signals between the workstation and all digital or analog audio I/O

devices.

AJA Balanced Audio breakout box and AJA OEM-2K board The Balanced Audio breakout box is the audio

component of the AJA breakout box. It provides connections for audio I/O. This breakout box connects to

the AJA OEM-2K board on your workstation. The OEM-2K board provides real-time input and output of

uncompressed SD and HD video signals as well as audio data at 24-bit resolution. The OEM-2K board handles

balanced AES/EBU audio signals from the Balanced Audio breakout box. The OEM-2K board supports

embedded audio up to 8 track.

Audio Wiring

To connect the Discreet Native Audio hardware components to the AJA breakout box, refer to the following

diagram.

32 | Chapter 5 Setting Up Audio Hardware

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

No comments

ATTO Technology 2390 Setup Guide Page 38